How to install an engine at a Ford factory

article Posted November 01, 2018 05:17:24If you are considering upgrading your Ford F-150 engine or your engine in general, you should know how to install it properly.

The following article will show you the right way to install the engine and how to do it in a professional way.

The engine will need to be installed at the factory, it is not required for the installation of the car or any other Ford vehicle.

If you decide to install your engine yourself, it will not be an easy task.

This article will explain how to handle the installation properly.1.

Remove the battery and transmission.2.

Remove all the bolts.3.

Install the clutch, oil pump and battery.4.

Install your oil pump.5.

Install and secure the fuel injectors.6.

Remove and clean the oil filters.7.

Install a new oil filter.8.

Install or remove the transmission and alternator.9.

Install all the parts to your Ford engine.10.

Clean the oil pan, engine oil pan and the transmission oil pan.11.

Remove your transmission and replace it.12.

Clean and reassemble your Ford car and engine.13.

Replace your oil pan with fresh oil.14.

Clean your transmission oil and transmission belt.15.

Remove, reinstall and clean your battery.16.

Install new oil pressure regulator.17.

Install oil filters and new oil pump, oil filter and transmission oil.18.

Install air filters.19.

Install transmission and engine wiring harnesses.20.

Clean all the electrical wires, switches and connectors.21.

Install electrical wiring harness.22.

Install alternator and battery wiring harness and connectors to your engine.23.

Install spark plugs and spark plugs.24.

Install ignition switches and wiring harness, connectors and connectors on your ignition switch.25.

Install starter plugs and starter plugs.26.

Install brake pads and brake pads.27.

Install fuel pressure regulator and fuel pressure sensor.28.

Install battery cover and battery cover.29.

Install water pump.30.

Install power steering.31.

Install differential.32.

Install coolant line and wires.33.

Install cooling fan.34.

Install radiator.35.

Install rear engine oil cooler.36.

Install fog lights and turn signals.37.

Install turn signals and parking lights.38.

Install windows.39.

Install window trim.40.

Install dash.41.

Install door mirrors.42.

Install headliner.43.

Install sun visors.44.

Install side skirts.45.

Install wheel arches.46.

Install center console.47.

Install dashboard.48.

Install steering wheel.49.

Install front seats.50.

Install engine oil.51.

Install throttle body.52.

Install clutch.53.

Install distributor.54.

Install ECU.55.

Install transfer case.56.

Install intake manifold.57.

Install turbocharger.58.

Install transaxle.59.

Install camshaft.60.

Install coilover.61.

Install crankcase.62.

Install exhaust.63.

Install carburetor.64.

Install crankshaft.65.

Install block.66.

Install valve cover.67.

Install filter manifold.68.

Install injectors and pump.69.

Install belt.70.

Install hoses.71.

Install muffler.72.

Install timing belt.73.

Install manifold pressure regulator assembly.74.

Install high pressure fuel line.75.

Install thermostat.76.

Install ecu.77.

Install heat exchanger.78.

Install intercooler.79.

Install boost controller.80.

Install catalytic converter.81.

Install converter.82.

Install wastegate.83.

Install fender trim.84.

Install bumpers.85.

Install grille.86.

Install hood.87.

Install sills.88.

Install lower rear bumper.89.

Install bumper cover.90.

Install upper rear bumper cover (optional).91.

Install interior trim.92.

Install spoiler.93.

Install sway bar.94.

Install roll bar.95.

Install strut bar.96.

Install torsion bar.97.

Install wing.98.

Install suspension components.99.

Install brakes.100.

Install shocks.101.

Install rotors.102.

Install hubs.103.

Install axle bolts.104.

Install shock mounts.105.

Install lockers.106.

Install locking bolts.107.

Install camber pins.108.

Install bushings.109.

Install wheels.110.

Install tires.111.

Install axles.112.

Install diffuser.113.

Install tire pressures.114.

Install spindles.115.

Install springs.116.

Install sliders.117.

Install bolts.118.

Install mirrors.119.

Install taillights.120.

Install tail lights.121.

Install flaps.122.

Install lights.123.

Install parking lights with lights.124