How to install a fire guard in football

When you want to put a fire engine into a football pitch, you have to have a fire officer.

You can’t just walk into the pitch and let it do the job, so the idea of installing a fire protection officer to protect the pitch is something that you need to have in mind.

A new installation by Italian architects has been unveiled that will let you install a guard on the pitch in a simple but effective way.

The team behind the installation have been working on this project since last year, and the first step was to take the existing installation on the training pitch at the academy of the Milanese national team.

In addition to the fire protection officers, the project also includes a metal panel that will allow the installation of a fire sprinkler system.

In order to install the system, the team used 3D printed parts, and these will be available at a later stage for a fee.

The whole installation is located on the side of the pitch where there are currently no fire safety regulations, so you will need to pay to remove the fire hazard and to secure the construction.

The system can be connected to a standard electrical system, or you can use your own device to power it.

The design of the guard is based on the “Baron Gavino” system, and this allows the system to withstand the force generated by the players.

You will also need to replace the existing guard that is located in the center of the field.

The guards can be installed with an additional metal panel on the end of the fire sprinklers to prevent them from being damaged.

The installation process is simple and can be done in less than an hour, and in the event of an accident the guards will have a self-destruct mechanism.

The team have also designed the system so that there is no risk of a serious injury when a player is hit by the system.

The first step of the installation is to remove all of the protective clothing that the team is wearing.

After removing the protective gear, the first thing to do is to install protective mesh on the guards, which will ensure that they can resist the impact of the collision with the players and that they will be able to maintain their position on the ground.

The mesh is attached to the metal panel which will allow for the installation to be done with a simple adhesive.

Once the adhesive is applied, the guard will be attached to a wooden panel which allows for the guards to be installed in the pitch.

The next step is to replace all of those protective mesh panels that were installed.

To install the guards without a fire alarm, the system will be activated via a simple electronic signal.

Once activated, the signal will be sent to a video camera that will record the moment that the guard hits the player.

The camera will then send the video to a computer, which is then able to calculate how many players are on the field at the moment the guard reaches the player, and which ones are the most vulnerable.

The number will then be displayed on the video.

The system is installed on the outside of the football pitch.

After this step is completed, the entire construction will be finished.

The guard system is completed and ready to be connected with the electrical system.

The electrical system will then activate the guards and the system can then be disconnected.

The final step is the most important one, and it is to connect the system with the protective mesh that was installed to the existing fire protection.

The mesh will then automatically be removed once the guard system has been installed.